Search This Blog

Showing posts with label reverse light. Show all posts
Showing posts with label reverse light. Show all posts

2016/10/07

Log 2016100701

I got a few things done today.

- Spare tire cover installed
The stock one was plastic with a wider outer diameter and it interfered with my hitch mounted bicycle rack.

- Frayed 12 gauge wire repaired temporarily
It's brown and I found out that was the main wire to my brake and running lights.  I realized during the repair that I didn't have any extra 12 gauge wire.  But I pulled it taunt enough to connect it with a blue cylinder.

- I purchased a laptop safe today, but in placing it in the motorhome, it ended up being larger than I wanted and wouldn't fit between the seats.

- A new sewer hose was cut to fit the motorhome's outside carrier compartment.  I didn't measure it when I did it, but I believe that it was cut down from 10ft to 6ft.  It's low priority at this point, but there's a lot of space behind there and I probably could upgrade the carrier and maybe install a second one?

As soon as I diagnose the reverse lights, I can get a piece of strip steel installed on the spare tire mount.  If I drill the holes right and lengthen the spare tire's bolts, I can JB Weld Steel Stick them together.  Then install a 90° angle at the top and mount the reverse camera to it.  The camera has to be taller than my biggest bicycle on the hitch rack.  And the hitch rack has an arm that extends about 30" up.

But in all actuality, I think I'd rather have it on more than just in reverse.  So, I might wire it straight to the battery via a switch?  One already exists in the cab for the lighter port power socket.  That already supplies power to the three way splitter and the tablet which will connect to the camera via Bluetooth.

2016/07/08

Log 2016070801

With the Air Injection Pipe for the right bank of the motorhome's engine still being 2 1/2 days away, not much has been going on here.  I did go to the auto parts store and purchased an air, oil, cabin air filters, some high mileage synthetic motor oil and front brake hardware for my 2008 Chevy HHR LS.  Because I don't have a garage, the weather tomorrow is looking like I'll have an opportunity to do that and organize some items in the motorhome, maybe even run a multimeter on the reverse lights.

I have somewhat of an idea why those haven't switched on.  One theory is while the have circular stems that insert into a reciprocal slot, twist and lock, as far as I know, it shouldn't matter which way they are.  But my brake light bulbs proved otherwise a few weeks ago. What if they're polarized and I have both of them inserted backwards?

The other theory is that I bought this motorhome with about 20 dead organ pipe wasp nests who had a particular fancy for the transmission.  This shouldn't be, but what if the switch has an actual arm as a part of it's mechanism that and it's exposed.  Sometimes, the organ pipe wasps like bolts and other things which protrude to build their nests on.  Since the make their nests out of mud, and it's quite hard now,  it could prevent a small metal arm of a switch from changing directions.

The one thing that I'm certain of is that I used a light up tester for every fuse in both blocks and they all work.

Now, my HHR's reverse switch has a connector at the transmission case, so it's switch has to be encased within.   But with the motorhome being an '88 and my ignorance... who knows? (I don't)

Log 2016070801

With the Air Injection Pipe for the right bank of the motorhome's engine still being 2 1/2 days away, not much has been going on here.  I did go to the auto parts store and purchased an air, oil, cabin air filters, some high mileage synthetic motor oil and front brake hardware for my 2008 Chevy HHR LS.  Because I don't have a garage, the weather tomorrow is looking like I'll have an opportunity to do that and organize some items in the motorhome, maybe even run a multimeter on the reverse lights.

I have somewhat of an idea why those haven't switched on.  One theory is while the have circular stems that insert into a reciprocal slot, twist and lock, as far as I know, it shouldn't matter which way they are.  But my brake light bulbs proved otherwise a few weeks ago. What if they're polarized and I have both of them inserted backwards?

The other theory is that I bought this motorhome with about 20 dead organ pipe wasp nests who had a particular fancy for the transmission.  This shouldn't be, but what if the switch has an actual arm as a part of it's mechanism that and it's exposed.  Sometimes, the organ pipe wasps like bolts and other things which protrude to build their nests on.  Since the make their nests out of mud, and it's quite hard now,  it could prevent a small metal arm of a switch from changing directions.

The one thing that I'm certain of is that I used a light up tester for every fuse in both blocks and they all work.

Now, my HHR's reverse switch has a connector at the transmission case, so it's switch has to be encased within.   But with the motorhome being an '88 and my ignorance... who knows? (I don't)