Search This Blog

Showing posts with label desk on wheels. Show all posts
Showing posts with label desk on wheels. Show all posts

2020/06/30

New House

I've moved into my new house.  The van is running.  The Robot (my media center computer) is up temporarily.  By that, I mean that my office needs 2 - 25ft black extension cords and conduits.  they have to get from the desk, over the windows and outside door to the wall opposite of the desk to access the 120V electrical outlets on the wall opposite of the desk.  But so far, I have everything powered with one extension cord that is hooked up to The Robot's battery back-up.  That needs to change. There's a surge protector mounted under the desk that powers all non-essential equipment, such as my printer.  During a power outage, the more load that you put on the battery back-up, the less time I'll have to save what I'm working on before it shuts down.

I had trouble locating my Map Repository on The Robot.  I wonder if before I left 2 years ago that I cut and pasted it into the laptop's hard drive instead of copied?

I have a smartphone mount on a large spring loaded arm.  Instead of using it's clamp, I drilled a hole in the surface of the desk and mounted it that way.  But it looks like it's smartphone bracket is missing?  It has four plastic hooks on it and it looks like a Bracketron model, or perhaps something from a dollar store?  I know my smartphone and tablet mounts as I've been working with them for years.  Those mounting brackets have to be replaced every so often.

I'm surprised that The Robot booted up at all.  Upon moving it from up north, it was the last thing that was loaded in the moving trailer.  When we opened the door, the moving trailer was at a slight back pitch and it tumbled over.  I was afraid that the needles in the hard disk drives crashed into their platters.  But, it booted up alright.  It was the first time in two years and has no unusual auditory sounds coming from the case.

I custom built my desk. It's 99 inches long.  I'm 6'6 (198cm), to the height was adjusted for me and that's at about 36 inches.  Just like my previous desk, I mounted wheels on this as well.  I'm missing an office chair, so I'm using one from the dining room right now, but it's not at the correct ergonomic height.  For that, I plan to get an old office chair.  One that isn't too comfortable anymore.  I got a set of two bench and two captains chairs from an old Dodge Caravan for $40 last year.  With the wheels, pole and mounting surface from the old chair, I plan to mount one of the captains chairs to it and that should get me the correct height?  And that Caravan captain's chair will take much longer for the seat to wear out.  I'll just have to create an adapter out of wood and some hardware to make it possible.

2017/12/11

Assembled & Awaiting Reprogramming

The Robot is assembled and most of the cables (except my laser printer) are hooked up.  It powers on, but the monitors don't come on and it's sending out beep codes.  I reseated the memory chips, but that didn't alleviate it.  I'll leave that for tomorrow when I hopefully reprogram the computer.

I don't remember the expansion Wi-Fi card that I purchased today.  It claims that it can reach 1300 megabits per second on the internal network.  That should be about top speed for Wireless N and I do swap large files over it from time to time.  For my mapping, I'm going to need it.  I don't know how big my map repository is?  I try to keep anything that isn't going to be needed immediately out of the "My Places" in Google Earth. Having everything there slows down the the applications start up.  So, I just keep certain things on the hard disk.  My My Places alone in KML format is currently about 146MB, which is probably on the large size for an amateur?

2017/12/07

Power and USB Extension Cords

Three new extension cords were procured for the desk's ability to roll.  It needed two new 15ft, 15Amp cords for the battery back-up and auxiliary power and one new 8ft cord for The Robot, which is stationary, to plug into to the battery back-up that is mounted to the roller platform.  I also went out shopping for 4 extension USB cables, but they were $33 a piece for USB 2.0 at Best Buy.  I thought that price was a little steep, so I only one purchased one.

This is Treeman's Adventures and Volunteerism.  The computer systems are necessary equipment for the said volunteerism.  It's like a cook stove is a piece of hiking equipment.  The title sets the parameters for what is discussed.  Like the US Post Office, if it fits, it ships.

The Desk and The Robot

My desk is coming along.  I built the platform that the 5" caster wheels mounted to out of 2x4 studs.  That raises the desk surface 8in.  I mounted my new battery backup to one of the studs using three thick 24in zip ties.  It has breathing gills on the sides, so I had to mount it standing vertically. 

The laptop in on a swing arm at the end of the desk.  A separate surge protector was mounted on the other side of it on a strut.  The only power cord that I ran through the electrical channel today was to reach the laptop and it's accessories.  So far, the channels look like their going to work well.  But I'm in need of 3 new extension cords capable of handling high heat because of the new arrangement.

I drove to Micro Center today to get The Robot's 1,200 watt power supply replaced.  Turns out that I didn't get an extended warranty, so I had to purchase a new one :-(.  And then I got the extended warranty for 3 years.  I don't know why I didn't do that in the first place?

So, I threw the old one way in the parking lot garbage can.  I have a power supply tester and it never powered on when I used it.  When I got back, I mounted the new one, but the system still wouldn't turn on.  So, I'm still in the middle of troubleshooting as I write this.

Other other channel on the desk is for data cables.  They and the electric need to be separated as much as possible to prevent "cross talk" through the cable and cord shieldings.  This is when stray bolts of energy in a power cable slip through a cord's shielding, then enter a data cable's shielding and disrupt communications because they use electricity, too, just lesser amounts.

The Robot is a "media center" computer.  It's built for movies and television shows.  But it's big and fast enough that it could be it's own server.  These days, I watch the same 700 episodes of television that I have been for the last 14 years.  What The Robot really is a glorified trail mapping machine.  And that needs a lot of power, too, considering what I do.

I'm an amateur GPS cartographer.  I've tracked out the 6,800 mile American Discovery Trail, merged together the 1,444mi Buckeye Trail and I have 4 of 7 states on the North Country Trail merged with Michigan in progress.  In order to do these, I had to display tracks for the Triple Crown  and the Great Western Trail (one trail at a time).

Since I have this data, I can make placemarks/ waypoints for items like Post Offices, libraries, hotels, motels, bed & breakfasts, hostels, campsites, campgrounds and grocers just to name a few.  You need tracks in order to have a basis on where to search for these things.  I've got mile markers for the Buckeye, American Discovery's tracks are already set up to get them and North Country's are already provided by the NCTA.  Overlaying park maps was resource (computer) intensive.  I have a full library. for the Buckeye and American Discovery.

I'm getting The Robot repaired to do some mapping this winter.  But I've got to get it repaired to channel the data cables on the desk and in the correct order.  It has 21 USB ports with 1.1's in the front, mostly 3.0's and two 3.1's.  I like to prioritize them by device.  For instance, keyboards and mice don't need 3.1's.